U76ezip -

Before installing the kit, it is recommended to perform on key locations to ensure the valve body is salvageable. Common wear areas include:

Remove the solenoid brackets, solenoids, and the small/large cover plates. 2. Inspecting Critical Wear Areas

Remove the counter gear/turbine speed sensor and disconnect the case connector from all seven solenoids. U76Ezip

After installation, you must perform a TCM Initialization/Memory Reset to allow the transmission computer to adapt to the new, corrected hydraulic pressures.

Reinstall the solenoids and plates using the original eight bolts, then re-secure the remaining components. Before installing the kit, it is recommended to

A separate quick guide sheet included in the kit provides the exact layout for part placement. 4. Reassembly and Initialization

Replace original components with the specific Sonnax parts provided in the kit. The kit typically includes O-rings, springs, and improved valves to restore hydraulic pressure. A separate quick guide sheet included in the

Wear here often causes 1-2 or 5-6 gear flares.