: Use a tool like the General CMS or the DeviceConfig tool.
: Ensure the camera is connected to a stable power source. Do not power off during the update. Installation Guide T20.base.HDXP2P.gen.en.201808131.IPC.tgz
: Open the .tgz archive and extract the internal firmware file (usually ending in .bin ). : Use a tool like the General CMS or the DeviceConfig tool
If the firmware resets your settings, the default login info for these boards is typically: : 192.168.1.10 or 192.168.1.18 Username : admin Password : (Leave blank) Installation Guide : Open the
: You will need a MicroSD card (FAT32 formatted) or the CMS/VMS software on a PC.
: Only use this if your camera's current firmware version contains the string HDXP2P . Flashing the wrong firmware can permanently brick the device.
The camera will usually play a series of tones or blink its status LED. Wait for the process to complete.