N_031.mp4 -

: Reconnect hoses and bleed the air from the hydraulic lines to ensure accurate readings. ⚠️ Critical Safety Checks

These sensors transform hydraulic pressure into electrical signals to calculate load. n_031.mp4

Before completing the assembly, verify these digital inputs: : Reconnect hoses and bleed the air from

: Set the boom between 0 and 5 degrees. Use an inclinometer to verify the actual physical angle. n_031.mp4

Below is a guide for the assembly and maintenance procedures typically associated with these technical standards. 🏗️ PAT/Hirschmann Crane System Guide