: Use Analysis > Geometry > Draft Check to ensure all vertical faces have a draft angle—typically 1° to 2° is standard, while textured surfaces may require 3° to 5° .
: The Mold Design Extension (MMX) provides catalogs for standard mold bases and hardware (ejector pins, slides, and lifters). Mold design Using PTC Creo Parametric (Pro Engi...
: Use the Mold Volume Split tool to divide the workpiece into distinct volumes—typically the Core (bottom half) and Cavity (top half). : Use Analysis > Geometry > Draft Check
: Automatically detect the outermost profile of the part to help define the parting line. Mold design Using PTC Creo Parametric (Pro Engi...
: Use the Mold Opening tool to check for interference and ensure the part can be successfully ejected from both halves. Key Advantages of Using Creo for Molds