Mastercam 2017 For Solidworks Tutorial (lathe) -

In the parameters, ensure you have a "Lead In" and "Lead Out" so the tool doesn't just plunge straight down into the material. 4. Roughing and Finishing This is where the shape happens.

In this tutorial, we’re going to walk through the essential workflow for programming a basic turned part in Mastercam 2017. 1. Preparing the Workspace Mastercam 2017 for SOLIDWORKS Tutorial (Lathe)

Since you are inside SOLIDWORKS, you can use the Manager Tree to select the edges of your model. Mastercam 2017 is great at "seeing" the profile of your solid. In the parameters, ensure you have a "Lead

Use a Lathe Rough toolpath. Keep your "Depth of Cut" conservative based on your material (Steel vs. Aluminum). In this tutorial, we’re going to walk through

Mastercam 2017 for SOLIDWORKS bridges the gap between "perfect design" and "perfect part." By staying inside the SOLIDWORKS interface, if you change a dimension on your 3D model, you can simply "Regenerate" your toolpaths in Mastercam without starting from scratch.

You can’t cut air (well, you can, but it’s not productive).