Manual Backwashing Tank Head ❲Web❳

Some models include a dedicated position to isolate the tank for maintenance without stopping water flow to the rest of the facility. Installation Guidelines

The standard operating mode where water flows through the filter media to the house or application.

Standard heads typically fit most mineral tanks with a 2.5-inch #8 opening . Manual Backwashing Tank Head

Hand-tighten the head onto the tank until the O-ring makes solid contact, then tighten another 1/4 to 1/3 turn . Do not use the handle to tighten the head. Operational Maintenance Manual Backwashing Valves - SWT

Use only Teflon tape on threaded fittings; liquid thread sealants or PVC glues can damage the plastic head. Some models include a dedicated position to isolate

A manual backwashing tank head is a non-electric control valve used to manage water flow through media filtration vessels, such as FRP tanks . It allows users to manually switch between service, backwash, and rinse positions to maintain media performance.

If you are not utilizing the backwash function, you must install a 1/2-inch plug in the backwash port. Hand-tighten the head onto the tank until the

Most manual heads feature a handle that rotates between three or four primary settings: