201 Rar — Jo Sinc Se

Thread the locknut onto the flange and hand-tighten, then snug it with a wrench. 2. Mount the Sink

Apply a bead of around the underside of the sink rim if it is a drop-in model. Lower the sink into the countertop cutout.

Tighten any mounting clips provided with the unit from underneath the counter. 3. Connect the P-Trap Connect the to the sink drain. Slide the slip nuts and washers onto the pipes. Jo Sinc SE 201 rar

Are you referring to a or a digital file/sample ?

Apply a ring of around the underside of the drain flange. Press the flange firmly into the sink's drain opening. Thread the locknut onto the flange and hand-tighten,

: Place a paper towel under the pipes for 24 hours to spot any slow, "stealth" leaks.

Hand-tighten all joints first; only use a wrench for a final quarter-turn to avoid cracking the plastic. ✅ Final Check Run the water for several minutes. Check all joints for moisture. Lower the sink into the countertop cutout

From underneath, slide on the rubber gasket and friction washer.