Emeleah.zip -
Small metal hooks to secure the elastic at the hands and feet.
A thin wire loop or a "hemostat" to pull the elastic through the narrow limb channels. Emeleah.zip
Often hosts the original files and assembly photos from Aelith Karkhu . Small metal hooks to secure the elastic at
Typically 1mm to 2mm round elastic cord (depending on the scale you printed). Typically 1mm to 2mm round elastic cord (depending
Because these files are often distributed in .zip formats containing various parts (limbs, torso, joints), the assembly process generally follows standard "stringing" techniques used for ball-jointed dolls. Before you begin, ensure you have the following tools:
Clean out all internal channels in the printed parts. Ensure the "internal paths" are clear of support material so the elastic can pass through freely. String the Legs: Start by looping the elastic at the head or neck connector.
Thread a separate piece of elastic through one hand (secured by an S-hook), through the arm segments, across the chest/shoulder cavity, and down the other arm to the second hand.
