Always perform a Factory Reset after a successful recovery to ensure all settings are cleared and the system is stable.

Press and hold the Power button on the front panel while switching the rear power toggle ON.

To ensure your device isn't damaged, you must download the exact firmware or dump file for your model.

If the USB method fails (e.g., the device is "bricked"), you must use an and a Loader Tool on a PC. Connect the receiver to your PC via the RS232 port. Open the Starsat Upgrade Tool . Select the .bin file you extracted.

Click "Start" and then turn on the receiver to begin the serial transfer.

For a standard USB recovery, your flash drive must be correctly formatted. Format your USB drive to .

This method is used if the receiver can still recognize USB input during its boot cycle. Turn off the Starsat 9000HD completely. Plug the USB drive into the receiver's USB port.