Use a drive (at least 1GB) formatted to FAT32 .

Look for the specific .rar or .bin file on sites like Deep Electronics Lab or dedicated Telegram repair channels.

The downloaded .rar file should contain a .bin firmware file (the actual dump). 3. Installation Methods

Extract the .bin file and place it in the root directory of the USB.

Ensure your panel supports Full HD (1920x1080) . Using firmware meant for a 1366x768 panel can cause display issues or brick the board. 2. Locate and Download the Dump File

or similar motherboard . This file is used to repair TVs stuck in standby mode, experiencing software glitches, or showing no graphics.

Depending on the board's condition, use one of the following methods: Use this if the TV can still boot or trigger a USB update.

If the TV is dead or stuck in standby, you must program the Flash IC (SPI Flash) directly.