: You must have Part 1, Part 2, and Part 3 in the same folder to extract the final .bin file correctly. USB Drive : A 4GB or 8GB USB 2.0 drive, formatted to FAT32 .

: After rebooting, you will see the "Welcome" or "Smart TV" logo and can proceed with the setup.

: Firmware for these boards is often hosted on community forums or shared by technicians on platforms like YouTube or specialized driver sites.

: Right-click on Part 1 and select "Extract Here." WinRAR or 7-Zip will automatically pull data from Part 2 and Part 3 to create the final firmware file. 📺 Flash Guide

: Do not power off the TV. Once finished, the TV will either reboot automatically or the light will stop blinking.

: The extracted file is usually named CV3Upgrade.bin . 📥 Downloading & Extraction

: The standby light should start blinking (usually red and blue or red and green). This indicates the software is installing.

Thêm vào giỏ hàng thành công
popup

Số lượng:

Tổng tiền: