1x12_b_h_us_

This feature focuses on a specialized back-relief and moisture-barrier coating to improve the durability and installation speed of large-format 1x12 boards.

: A subtle "H" (High-relief) taper where the bottom edge is 3/4" thick for a sturdy floor transition, while the top beveled edge thins to 1/2" for a sleek, low-profile look against the drywall. Technical Specifications Material : Vertical Grain (VG) Western Hemlock. Dimensions : 0.75" x 11.25" (Actual US Standard for 1x12).

: S4S (Surfaced on 4 Sides) with a pre-sanded 180-grit face. 1x12_B_H_US_

: A modern, minimalist 12-degree bevel on the top edge that transitions into a flat face, providing a sharp architectural shadow line without the bulk of traditional crown molding.

: A specialized US-standard gray primer applied to all six sides, specifically formulated to prevent the "tannin bleed" often seen in Western Hemlock when exposed to humidity. This feature focuses on a specialized back-relief and

Here is a proposed feature set for a high-end or baseboard designed for the US market:

g., a 1x12 battery header) or ? If you can provide the category , I can tailor the specs further. Dimensions : 0

: Two 1/8-inch deep vertical grooves milled into the back of the board. This reduces "cupping" (warping) common in wide 1x12 hemlock planks by allowing the wood to breathe and flex against the wall surface.